Banner Solar street light 30w

30w Solar Street Light

Newskypower 30w Solar Street Light

Newskypower 30W solar street lights are usually suitable for installation at a height of approximately 4-6 meters.

This height ensures that the street light covers the area to be illuminated and that the solar panels are fully exposed to the sunlight for charging.

NK solar street light
  • Model: NK-30W
  • MONO Solar panel
  • LiFePO4 lithium battery
  • Die-casting aluminum body
ND Series Solar Street Lights
  • ND-30W
  • MONO Solar panel
  • LiFePO4 lithium battery
  • Die-casting aluminum body
  • Model: SCL-007plus-3
  • MONO Solar panel
  • LiFePO4 lithium battery
  • Die-casting aluminum body
3 Products Found.

Feature of Newskypower 30W Solar Street Light

easy installation
Easy Installation
Die-cast Aluminum
Outdoor Waterproof
Lithum battery
LiFePO4 Lithium Battery

Anti-Rust Housing Material

The shell material of the 30W solar street light is high-quality die-casting aluminum, which has the characteristics of high strength and good corrosion resistance.

It can effectively cope with the salt spray environment in coastal areas and will not rust even after a long time. An IP65 rating prevents low-pressure water from seeping from outside, making a 30W solar street light ideal for outdoor applications.

feature solar light
feature PIR solar street light

Energy Saving Work Mode

Newskypower 30W solar street light can be equipped with or without an infrared sensor according to customers’ requirements. The sensing distance is usually 8-10 meters.

In sensing mode, the LED lamp activates full brightness for 30 seconds when someone is walking in the sensing range, and dims down to 30% brightness when someone walks out of the sensing range. The life of lithium batteries is greatly extended under this work mode.

Long Lasting Lithium Battery

As the core component of a 30W solar street light, the battery directly determines its service life. NESKYPOWER 30W solar street light adopts brand new A-grade lithium iron phosphate batteries, whose cycle times can reach more than 2000 times.

To ensure the maximum output of 30 watt solar street lights, NEWSKYPOWER uses 12.8V battery pack, batteries are connected in series to form a 12.8V system, which requires high consistency of each battery. Many of the 3.2V systems on the market use recycled batteries, Batteries are prone to failure and damage.

lithium battery

30W Solar Street Light Projects Gallery

Scroll to Top